Basic Controls
The remote control is not included with this set. Available for purchase separately. Object model : EUR7636070R Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. R button (see page 17) Press the R button to return to previous menu screen. ACTION button Status button Press to make POSITION Press the �Status� button to display the current system status. selections. buttons PC 1 1 Input label NORMA L 2 2 Aspect mode (see page 18) SOUND button (see page 24) 3 Off timer The off timer indicator is OFF TIMER 90 3 displayed only when the off timer has been set. SET UP button (see page 16, 17) DIRECT INPUT buttons Press the INPUT �1�, �2�, �3� or �PC� input mode selection button to select the INPUT mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal. When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B) Note: Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 42), this function is not the perfect solution to image retention. Channel Adjustment You can use this button when U/V Tuner Board with MATE I/F is installed (optional accessories). Refer to each Board�s Operating Instruction for detail. Volume Adjustment Press the Volume Up �+� or Down ��� button to increase or decrease the sound volume level. OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 60 90 0 When three minutes remain, �OFF TIMER 3� will flash. The off timer is cancelled if a power interruption occurs. Digital Zoom (see page 25) Press to access Digital Zoom. This displays an enlargement of the designated part of the displayed image.
