Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
Name of measuring instrument RF generator Base Band generator Adjustment of AV system
Connection
Remarks
Remarks
1. Receive AV1 (PAL-M or NTSC 100% Full White or Split Colour bar shown as below).
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512. (It checks that an initial value is a default) 3. The colour key yellow button of remote control is pushed. 4. The OSD character of sub-contrast becomes red. (Inside under automatic adjustment) 5. The OSD character of sub-contrast returns to white. 6. End.
Adjustment of RF system
1. Receive a RF. (PAL-M or NTSC 100% Full White or Split Colour bar shown as below).
Remarks
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512. (It checks that an initial value is a default) 3. The colour key yellow button of remote control is pushed. 4. The OSD character of sub-contrast becomes red. (Inside under automatic adjustment) 5. The OSD character of sub-contrast returns to white. 6. End.
Adjustment of HD system
1. Recieve Component (1080i/ 60Hz or 1080i/ 50Hz, 100% Full White or Split colour bar as shown below).
Remarks
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 384. (It checks that an initial value is a default) 3. The colour key yellow button of remote control is pushed. 4. The OSD character of sub-contrast becomes red. (Inside under automatic adjustment) 5. The OSD character of sub-contrast returns to white. 6. End.
4. Conductor Views
4.1. TU-Board 4.2. DG-Board
5. Schematic and Block Diagram
5.1. Schematic Diagram Note