Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
9. Remove the screws (�2 ). 10. Disconnect the couplers (K1). 11. Remove the K-board.
6.28. Replace the plasma panel (finished) 1. Place the new plasma panel (finished) on the flat surface of the table (covered by a soft cloth), with the plasma panel surface facing downward. 2. Attach the C1-Board and the C2-Board, connect the flexible cables (�8) from the Plasma panel to the C1-Board and the C2-Board, and fit the flexible cable holders. 3. Attach the Hooks (left, right) and fit the stand brackets (L, R) to the new plasma panel. 4. Place the plasma panel section on the servicing stand. 5. Attach the front frame and each P.C.Board and so on, to the new plasma panel. * When fitting the front frame, be careful to allow any debris, dust or handling residue to remain between the front glass and plasma panel.
