Basic Controls
Standby (ON / OFF) button The Plasma Display must �rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. POSITION buttons ACTION button Press to make selections. SOUND button (see page 26)
OFF TIMER 90 3
R button (see page 17) Press the R button to return to previous menu screen. Status button Press the �Status� button to display the current system status.
NORMA L
PC
1 2
1 2 Aspect mode (see page 19) 3 Off timer
Input label
The off timer indicator is displayed only when the off timer has been set.
SET UP button (see page 16, 17) DIRECT INPUT buttons Press the INPUT �1�, �2�, �3� or �PC� input mode selection button to select the INPUT mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal. Note: After-image (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent after-image (see page 44), this function is not the perfect solution to after-image. Channel Adjustment This button cannot be used for this model. Volume Adjustment Press the Volume Up �+� or Down ��� button to increase or decrease the sound volume level. OFF TIMER button The Plasma Display can be preset to switch to stand-by after a �xed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 60 90 0 When three minutes remain, �OFF TIMER 3� will �ash. The off timer is cancelled if a power interruption occurs. Remote ID lock (see page 36) Digital Zoom (see page 27) Press to access Digital Zoom. This displays an enlargement of the designated part of the displayed image.