Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 42 (kliknij aby zobaczyć)
MAIN MENU Settings
Changing the DECODE MODE
(See page 18) This option is used to change the digital audio decode mode. The default setting of [AUTO/PCM] is recommended for regular use. When the playback source is DVD, you may select a DECODE MODE.
3.
Use the 2/3 cursors to set the DSP mode.
When the source is DVD: You may choose between �SURROUND� j �OFF� When the source is not DVD or TUNER*: You may choose between j SURROUND j THEATER j LIVE CLUB j DANCE CLUB j HALL j PAVILION j OFF j (back to the beginning) * When the source is set to tuner, the MAIN MENU will not be displayed.
1. 2.
Open the MAIN MENU
See page 39, �Opening the MAIN MENU�.
Move the pointer to DECODE MODE using the 5/� cursors.
Adjusting the volume
(See page 16)
1. 3.
Use the 2/3 cursors to set the decode mode.
The following decoding options are available: AUTO/PCM, DOLBY DIGITAL, or DTS. � See page 18 for details of each in decode mode.
Open the MAIN MENU.
See page 39, �Opening the MAIN MENU�.
2.
Move the pointer to VOLUME using the 5/� cursors.
Note: � Only audio for discs for the selected decode mode may be played when a decode mode other than �AUTO/PCM� is selected. When the decode mode is changed and a disk has been played back, return the decode mode to �AUTO/PCM�.
3.
Use the 2/3 cursors to adjust the volume level.
Press 3 to increase the volume. Press 2 to decrease the volume.
Changing the DSP MODE
(See page 20)
1. 2.
Open the MAIN MENU.
See page 39, �Opening the MAIN MENU�.
Move the pointer to DSP MODE using the 5/� cursors.
