JVC TH-A35
Instrukcja Serwisowa

TH-A35
Removing the MAIN Board ( See Fig.6 & 7 )
[Caution] Main board may be taken out when the
mpeg board has been taken away. 1. Force the PCB spacer Q to exit the holes of main board. 2. Unscrew the screw P. 3.Unscrew the screw R then you can remove the main board with heat sink. 4.Untie or open connecters to power transformer, PWB,AMP, DVD - mech.
Q P

Fig. 6

Fig. 7

Removing FAN (See Fig.8)
1.Unscreew 3 screws R with HOLDER, pull out connector from PWB, main.
2.Unscrew 2 screws S from HLDR.
R S

Fig. 8

Removing the Thermal - Regifer (See Fig.9)
1.Unscreew the screws though power IC and thermal- HOLDER.
2.Pull wire of thermal - register from PWB main.
PULL

Fig. 9

1-8