JVC TH-A35U
Instrukcja Obsługi

Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.

To tune in a preset station
From the remote control ONLY:

1

Press FM/AM repeatedly to select the band.
The last received station of the selected band is tuned in.

FM/AM

To store the preset stations automatically
From the remote control ONLY: Press and hold MEMORY for a while.
REC/MEMORY

� Each time you press the button, the band alternates between FM and AM.

�AUTO SAVE� appears on the display, and automatic preset starts. Local stations with the strong signals are searched for and stored automatically in the band. When FM preset is over, the band changes to AM and automatic preset starts.

2

Press the number button to select a preset station.

1 5

CENTER REAR-L

2 6

SUBWOOFER REAR-R

3 7

4 8

To store the preset stations
From the remote control ONLY:

� To select number 1 to 9, press the TEST CLEAR SETTING 9 0 corresponding number button, then press ENTER. � To select number 15, press 1, 5 then press ENTER. � To cancel a mis-entry, press CLEAR. � You can press ¡/1 to select the preset station. ¡: Increases the preset number. 1: Decreases the preset number.

1
L

Tune in the station you want to preset (see �Tuning in Stations�).
R

TUNED

STEREO

MHz

2
L

Press MEMORY.
�SAVE TO� appears on the display.
R

REC/MEMORY

Selecting the FM Reception Mode
When a stereo FM program tuned currently is noisy, you can change the FM reception mode to improve the reception. From the remote control ONLY:

TUNED

STEREO

3

Press the number button to select a preset number.
� To select number 1 to 9, press the corresponding number button. � To select number 15, press 1, 5. � To cancel a mis-entry, press CLEAR.

CENTER

SUBWOOFER

1 5

REAR-L

2 6

3 7 0

REAR-R

4 8

Press FM MODE. The STEREO indicator goes off from the display and the program loses the stereo effect.

FM MODE

TEST

9

CLEAR SETTING

To resume the stereo effect, press FM MODE again. The stereo effect resumes.

FM MODE

Note:

4

Press ENTER to store the preset station.
�SAVED� appears on the display and the station is assigned to the selected preset number.
ENTER

The FM reception mode will also resumes in the following cases: � When you change the frequency, the preset number, or the band � When you change the source (If you use SOURCE button on the unit, the FM reception mode is memoried.) � When you turn off the system

5

Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station
Storing a new station on a used number erases the previously stored one.

49