Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 79 (kliknij aby zobaczyć)
Getting started
Connecting the powered subwoofer
Connect the supplied powered subwoofer (SP-PWA55) using the system cord (supplied). � Connect the system cord by matching the 5 marks on the plugs to the ones on the center unit and powered subwoofer.
System cord (supplied) Ensure that the 5 mark on the plug faces down.
Powered subwoofer Center unit
Connecting the satellite speakers
% Speaker layout
When positioning the speakers, to obtain the best possible sound from this system you need to place all satellite speakers at the same distance from the listening position with the front of each speaker facing toward the listener.
When you cannot place them at the same distance from the listening position, you can make adjustment so that speakers operate as if they are placed at the best position. (A pg. 48) A Front left Front right
� Normally place the powered subwoofer in front of you. (Since bass sound is non-directional, you do not need to place it at the same distance as the other speakers.) NOTE
� Although the satellite speakers and the powered subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep the distance between them to the TV to over 10 cm. � For safety reasons, always ensure that there is sufficient space behind the powered subwoofer. � When you position the satellite speakers in a relatively high place, such as the top of your bookshelf, place them on a flat and level surface. � Be sure to place the powered subwoofer to the TV�s right. If you place the powered subwoofer to the TV�s left, keep sufficient distance between them to prevent the TV from appearing mottled.
