KENWOOD THK2AT
Instrukcja Serwisowa

TH-K2AT/K2E/K2ET
ADJUSTMENT
J. 13.8V TX M power (Lower limit frequency, center frequency, upper limit frequency) 113.8V TX M power (Lower limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13L� on the LCD. In this case, the � � icon appears. The current APC value is displayed at the lower digits of the frequency display, and the value stored in the EEPROM is displayed on the memory channel number display. (4) Repeat steps (4) to (7) of �113.8V TX M power (Lower limit frequency)� described on page 32. K. 13.8V TX L power (Lower limit frequency, center frequency, upper limit frequency) 113.8V TX L power (Lower limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13L� on the LCD. In this case, the � � icon appears. The current APC value is displayed at the lower digits of the frequency display, and the value stored in the EEPROM is displayed on the memory channel number display.

(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the lower limit frequency on the LCD. (4) Press the [CALL] key to switch to the adjustment display. (5) Press the [PTT] key to enable the transmit mode. (6) Turn the encoder to change the current APC value and adjust the transmission power. (7) Press the [MENU] key to write the current APC value into the EEPROM. 213.8V TX M power (Center frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13C� on the LCD. In this case, the � � icon appears.

(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the lower limit frequency on the LCD. (4) Press the [CALL] key to switch to the adjustment display. (5) Press the [PTT] key to enable transmit mode. (6) Turn the encoder to change the current APC value and adjust transmission power. (7) Press the [MENU] key to write the current APC value into the EEPROM. 213.8V TX L power (Center frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13C� on the LCD. In this case, the � � icon appears.

(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the center frequency on the LCD. (4) Repeat steps (4) to (7) of �113.8V TX M power (Lower limit frequency)� described on page 31. 313.8V TX M power (Upper limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13H� on the LCD. In this case, the � � icon appears.

(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the center frequency on the LCD. (4) Repeat steps (4) to (7) of �113.8V TX L power (Lower limit frequency)� described on page 32. 313.8V TX L power (Upper limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13H� on the LCD. In this case, the � � icon appears.

(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the upper limit frequency on the LCD. 32