TOSHIBA TLP250,C
Instrukcja Serwisowa

2-2 Adjust the shading data (1) Select adjusting color (Red/Green/Blue) form the [Setting] menu.

Note: You must change the builtin signal level corresponding to the chosen level. Max : 75% Mid1 : 50% Mid2 : 26% Min : 11% Example: If you select [Mid1], set the builtin signal level 40%.

(4) Select the adjusting area (check box). Click the [up] or [down] button to change the shading data.

(2) Select adjusting level (Max/Mid1/Mid2/Min) form the [Setting] menu.

(Note) When a number button is chosen, a straight line can be chosen.

(3) Select the internal signal patern. (White Patern) Set the following level and press [OK] button.

After setting push [Close] button.

1-27