TOSHIBA TLPT50
Instrukcja Serwisowa

3-4. Optical Engine

Step

Figure
Cable retainer

Explanation . Remove 1 screw (a) on the lamp housing, and cut the cable retainer. Remove the white cable from the cable retainer. . Remove 1 screw (a) of the cable retainer, and 2 screws (b and c) of lamp housing. . Disconnect the ballast power cable (thick Black) and thermal switch cables (Red and Black) from the lamp housing. Screw: type [M-4]

1

(b) (a) (c)

2
(a) (a) (b)

(a) Remove 4 screws (3 x 12). Screw (a): type [M-5]

(b) Remove 2 screws (3 x 8). Screw (b): type [M-4]
(a) (a) (b)

3

Optical engine can be removed by lifting slowly up.

1-6