Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
1 2
15
� +
Y/ C
3 4
5 6
7 8
B
VIDEO VIDEO
9 10
A
11
ON OFF
TM-2100PN-K
PHASE
CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
INPUT SELECT
POWER
�
+
Y/ C
B
VIDEO
VIDEO
A
ON OFF
TM-2100PN-K
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
INPUT SELECT
POWER
12 13 14
1 Phase button [PHASE
]
Press this button to set the picture hue adjustment mode. Adjust the value with the VOLUME/SELECT buttons. Also used as a control button in the menu function mode.
9 Input A (VIDEO) button [INPUT SELECT A VIDEO ]
Selects the video signal input to the VIDEO A terminal (BNC connector) and the audio signal input to the AUDIO A terminal (RCA connector) on the rear panel. When selected, the input A (VIDEO) indicator $ lights.
2 Chroma button [CHROMA
]
Press this button to set the picture colour density adjustment mode. Adjust the value with the VOLUME/SELECT buttons. Also used as a control button in the menu function mode.
10 Power indicator
Lights in green when the power is ON. Lit : When the power is on. Unlit : When the power is off.
3 Brightness button [BRIGHT
]
11 Power switch [POWER
]
Press this button to adjust picture brightness. Adjust the value with the VOLUME/SELECT buttons. Also used as a control button in the menu function mode.
Press this switch to turn the power on or off. _ ON : Power is turned on. � OFF : Power is turned off.
4 Contrast button [CONTRAST
]
12 Input B (Y/C) indicator
Lights in green when the Input B (Y/C) is selected.
Press this button to adjust picture contrast. Adjust the value with the VOLUME/SELECT buttons. Also used as a control button in the menu function mode.
13 Input B (VIDEO) indicator
Lights in green when the Input B (VIDEO) is selected.
5 Menu button [MENU]
Displays and exits the <MENU> screen. Pressing the PHASE button with the Menu button depressed will display the <SET-UP MENU> screen.
14 Input A (VIDEO) indicator
Lights in green when the Input A (VIDEO) is selected.
15 Speaker
A built-in speaker is located inside the right side panel when the monitor is viewed from the front.
6 Volume/Select buttons [VOLUME/ SELECT � +]
Adjusts the speaker volume. Also used as a control button in the menu function mode.
7 Input B (Y/C) button [INPUT SELECT B Y/C ]
Selects the video signal input to the VIDEO B (Y/C) terminal (mini DIN 4 pin connector) and the audio signal input to the AUDIO B terminal (RCA connector) on the rear panel. When selected, the input B (Y/C) indicator @ lights.
8 Input B (VIDEO) button [INPUT SELECT B VIDEO ]
Selects the video signal input to the VIDEO B terminal (BNC connector) and the audio signal input to the AUDIO B terminal (RCA connector) on the rear panel. When selected, the input B (VIDEO) indicator # lights.
