PHILIPS TP3684C
Instrukcja Obsługi

USING THE AUDIO/VIDEO INPUT JACKS (CONT�D)
S-VIDEO INPUT
The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity for the playback of S-VHS VCR tapes or Digital Video Discs than the normal antenna picture connections. Note: The VCR (or Digital Video Disc player) must have a SVIDEO OUT(put) jack in order for you to complete the connections shown on this page.
BEGIN
24

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current channel, to the last viewed channel, then to the AV 1 connection, to the AV 2 connection. This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last channel viewed, then to the MM 1 (AV 1) connection, to the MM 2 (AV 2) connection. When using the S-Video input jack remember that it will take precedence over any video signal coming from the Video IN-1 jack. The signal from the S-Video jack can only be viewed on the AV 1 channel.

BACK OF TV

1
S-VIDEO CABLE (NOT SUPPLIED)
S-VIDEO VIDEO

L

Connect the S-VIDEO CABLE to the S-VIDEO input jack on the rear of the television, then connect the AUDIO (red and white) cables to the AUDIO IN (IN 1) jacks on the rear of the TV. Connect the S-VIDEO CABLE to the S-VIDEO output jack on the accessory device. Then, connect the red and white AUDIO CABLES to the AUDIO (left and right) output jacks on the rear of the accessory device. Turn the VCR (or Digital Video Disc Player) ON. Press the AV button on the remote to tune to the AV 1 channel. You are now ready to view the tape or disc on the TV.

ANT "A" 75

AUDIO R/MONO IN-1 IN-2 OUT

AV 1

AUDIO IN (RED/WHITE)
AV 2

VIDEO IN (YELLOW)

2
S-VIDEO OUT R L AUDIO OUT

ANT/CABLE OUT

BACK OF ACCESSORY

4
SLEEP POWER TV AV ON/OFF POSITION FREEZE VCR SWAP SOURCE UP ACC PIP CH DN

3

DBS, DVD, Video Game, etc. (EQUIPPED WITH S-VIDEO AND AUDIO OUTPUT JACKS) IF YOU ARE USING A NON-STEREO DEVICE, USE ONLY THE AUDIO R/MONO JACK. IF A DUMMY JACK IS PLUGGED INTO THE AUDIO L, NO SOUND WILL BE HEARD.

SMART

SMART

SOUND

PICTURE

MENU

SURF

SMART HELP
VOL CH
MUTE

The S-VIDEO and VIDEO IN-1 inputs are in parallel. The S-VIDEO input is will take precedence when in use. If separate video signals are connected to the SVideo and VIDEO IN-1 inputs, the signal from the VIDEO IN-1 input will not be useable. If you have added AV 1 to the TV�s channel memory, just press the CHANNEL + or � buttons until the AV 1 (channel) mode is selected.

CC

STATUS

CLOCK

A/CH

EXIT

TV/VCR

VCR

MULTI

RECORD INCREDIBLE

MEDIA

STEREO

32