Experiment with the overdrive parameter for the upper band, as well as the cutoff frequency for the bands. Even with this simple combination you can get a fun variety of tones. Bonus Tip: As you work with multiband effects, you'll see horizontal lines appear on the upper mini-spectrum when you select a control. These are handles to the setting that you've selected, but for other bands. So without switching bands, you can drag these handles up and down to adjust the same parameter for other bands As an example, for the screen below, we've selected the lower band and we're adjusting the input gain. We could adjust the input gain for the middle and upper bands with the horizontal handles on the spectrum.
