NOBELS TR-X
Instrukcja Obsługi

Owners-Manual

Operation:
Insert a 9V battery (2) or connect a regulated 9V power supply adaptor to the DC jack (4). Connecting an instrument to the input jack (3) will automatically switch the unit on. Connect your amplifier(s) to the output jack (6). Select your desired sound with the 4 control knobs and the mode selector (7, 8,10,12,13) . (see Sound examples) Instead of using this unit on the frontstage, you can place it with your equipment and control it with a standard momentary footswitch connected to the remote jack (5). Before changing the battery (2) always unplug the input jack (3) to switch the unit off. We suggest to use a regulated 9V power supply adaptor to keep our environment clean. Power supply specifications: see imprint on bottom of unit. - Thank you. Pressing the pedal (1) switches the unit on or off.

TR-X
Specifications
Power Consumption Input impedance 9V dry battery / AC adaptor max. 15mA 1Mohm Output impedance 2Kohm Max. input +6dBm Controls EFF-Level,Tone, Speed, Intensity MODE-Schalter Triangle/Rectangle - Soft/Hard Jacks Input, DC, Remote, Out Remote momentary switch Display Green LED (ON/OFF), red LED (SPEED) Dimensions 74mmx126mmx58mm Weight 450g (Without battery!) Specifications are subject to change without notice!
KTA 980413-2040

-

Important notes:
-

Avoid using this unit in extreme humidity, heat or dust environment. When the unit is not in use for longer periods, remove the battery (2) to prevent damages by battery leakage. Also unplug the input (3) to prevent wasting battery life when the unit is not in use.

Sound Examples:

EFF.-Level

TONE

SPEED

INTENSITY

Function:
(3) IN jack: Inserting a plug switches the unit on. (4) 9V DC jack: Connect a regulated 9V power supply unit. (5) REMOTE jack: The ON / OFF-function can be remote controlled by a momentary switch, connected to the REMOTE jack (5). Intelligent switching devices (like the Nobels MF-2 or MS-4) also can remote control the unit. (6) OUT jack: This output delivers a low impedance output signal best for the input of your amplifier. (7) EFF.-LEVEL control: Adjusts the volume of the tremolo effect.

-1 Classic Tremolo

-2 High Speed

-3 New Tremolo

(8) TONE control: Special designed circuit to create a totally new tremolo effect! Turn the control clockwise and the treble will be less modulated. (9) ON LED: Shows the state of the tremolo effect.

-4 Soft Tremolo

(10)SPEED control: Adjusts the speed of the modulation. (11)SPEED LED: Shows the speed of the modulation.

-5 Machine

(12)INTENSITY control: Adjusts the strength of the modulation. (13)MODE selector: Select one of the four different modulation modes. S=Soft modulation; H=Hard modulation.