SONY TS10
Instrukcja Serwisowa

1-2-23 Plate Ground Deck, Cylinder Ass�y Removal
1) Remove the 3 Screws �. 2) Lift the Plate Ground Deck ´. 3) Lift the Cylinder Ass�y �. Assembly : 1) Match the 3 holes in the bottom of Cylinder ass'y � to the 3 holes of Main Base as attending not to drop or knock the Cylinder ass'y �. 2) Tighten the 1 Screw �. 3) Match the Plate Ground Deck ´ to the Hole of Base Main. 4) Tighten the other 2 Screws �.

1-2-24 Belt Pulley Removal
1) Remove the Belt Pulley �. Note : Take extreme care not to get grease on Belt Pulley � at assembling or reassembling.

� BELT PULLEY

Note : 1) Take care not to touch the Cylinder Ass'y � and the tape guide post at reinstalling. 2) When reinstalling, Don't push down too much on Screw Driver.

� 3 SCREWS

Fig. 1-30 Belt Pulley Removal
´ PLATE GROUND DECK

1-2-25 Level Head Cleaner Ass�y Removal
1) Release the Hook �. 2) Lift the Lever Head Cleaner Ass�y ´.
´ LEVER HEAD CLEANER ASS'Y

� HOOK

SLEEVE-HEAD CLEANER

� CYLINDER ASS'Y

Fig. 1-29 Plate Ground Deck, Cylinder Ass�y Removal

Fig. 1-31 Level Head Cleaner Ass�y Removal

� 17 �