Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
ON-SCREEN MENU CONTROLS (CONTINUED)
VOLUME
VOLUME BAR
BEGIN
SMART
Press the VOL (+) or (-) buttons to turn the VOL BAR control ON or OFF. Press STATUS button to clear the screen.
U
se the Volume Bar control to see the TV�s volume level settings on the TV screen. Once set the Volume Bar will be seen each time the VOLUME buttons (on the TV or remote) are pressed.
Press the MENU (M) button on the remote, then press the CH (+) or (�) (or press the MENU v or w buttons on the TV) to select the word VOL. BAR with the TV�s on-screen Arrow.
HELP
Try it out. Press the VOL (+) or (�) buttons. The VOLUME BAR should appear at the bottom of the screen. NOTE: The TV's
3 1
VOL MENU MUTE VOL CH A/CH STATUS/E XIT CH POWER
VOL. BAR EXIT SETUP BRIGHTNESS PICTURE COLOR
ON OFF
volume level can also be lowered when the set is turned OFF.
1 2 4 7 8
CC
5 9
SLEEP
3 6
VOLUME
0
2
LIMITING THE VOLUME
BEGIN
SMART
Press the VOLUME (+) or (�) button until the VOL. LIMIT bar is at the level you want to be the highest possible volume. Press the STATUS button to set the maximum volume level. The screen will clear and the TV will return to normal channel viewing.
Y
ou can limit the maximum volume level of the TV set. Once the Volume Limiter control is set the TV sound cannot be played louder than the maximum preset level.
Press numbers 0, 7, 2, 0, 9, 1; then press MENU (M) button on the remote or TV. The VOL. LIMIT bar will show on the screen.
HELP
Remember, the Volume Limit Bar will appear to return to the low end of the register (when the STATUS button is pressed to set the desired maximum volume level - step # 3). This is normal for setting the Volume Limiter. Your new maximum volume level has been kept in memory.
NOTE: Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service.
3 1
VOL MENU MUTE VO CH A/CH L STATUS /EXIT CH POW ER
VOL. LIMIT
1
4 7 8
CC
1 2 5 9
SLEEP
3 6
0
2
SMART
Press the VOLUME (+) or (�) buttons to turn the STEREO mode ON or off. Press the STATUS button on the remote control to clear the screen.
STEREO
STEREO TV SOUND
BEGIN
Y
our TV can receive broadcast stereo TV programs. The TV has both an amplifier and twin speakers through which the stereo sound can be heard.
Press the MENU (M) button on the remote, then the CHANNEL v or w buttons (or the MENU v or w buttons on the TV) to select the word STEREO with the TV�s onscreen Arrow.
HELP
Remember, if the TV is set to STEREO but the current channel is not broadcasted in stereo, the sound at the TV will remain monaural.
1
STEREO CABLE CHANNEL SLEEP CAPTION VOL. BAR
ON
12
3
VOL MUTE
STATUS/E
XIT CH POWER
OFF
MENU VOL CH A/CH
1 2 4 7 8
CC
5 9
SLEEP
3 6
STEREO
0
2
NOTE: The TV�s on-screen �STEREO� indicator appears whenever the TV detects an incoming stereo signal. Be sure the TV�s STEREO control is also turned �ON� in order for the stereo sound to be heard through the TV�s twin speaker system.
