frequency. You�ll have to adjust the level of the instrument depending on how much you cut, but you should find that with the �problem area� pulled out, the instrument works better in the mix.When recording EQ�d instruments you want to make sure you have good representation of frequencies on tape. Always monitor �off� tape when recording. This ensures that what you�re hearing is what is on tape. When recording things like kick drums, make sure you have enough low end �thud� and high end �click� (if applicable) before you record. Recording guideline: You can always boost or cut frequencies after they�ve been recorded, but you can�t add frequencies that weren�t� recorded! Always be prepared for the drummer who says he loves the John Bonham kick drum sound (lots of low end power and ambiance) you got when recording but during the mix decides he wants to sound like Metallica (more click than punch).If you get the sounds right when you record the tracks you shouldn�t be spending a lot of time reEQing during the mix. During mixing you should be concentrating on the blending of tracks and the dynamics of the song. If you find yourself EQing everything, take a break and come back to it later. Start mixing with a group of instruments (the whole drum kit or guitars and bass) instead of listening to individual tracks. Mixing is the time for tweaking -- not applying a sonic re-design. Once again, �if it sounds good, print it!� Trust your ears -- nevermind where the knobs are pointing.
Tube Replacement
The Tubes in your Tube Channel should last for many years. They are hand-sorted for performance. In the event that you need to replace them, A R T suggests that you do so with tubes available from A R T. These are matched to the Tube Channel and will yield consistent sonic results. You can replace the tubes with other brands, however A R T has no responsibility for the resulting sound quality. They may sound better, they may sound worse. The choice is yours. Please realize that unauthorized alterations to the Tube Channel will result in voiding the warranty.
