Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
Basic Operation
English
Playing Back TV Audio through the FM Radio (FM Transmitter Function)
The TV audio can be heard through your FM receiver by transmission of a modulated FM signal. This setting is made on the TV screen.
1
FM T.
Press the FMT. button. Each press of the button changes the frequency by 0.1 MHz step.
FMT OFF
FMT 87.5MHz
FMT 88.4MHz
Select a frequency which does not exhibit interference with a local FM station.
2 3
Turn on the FM radio and select the FM mode.
Tune in the FM car radio frequency. Tune in the frequency which gives the best sound near the frequency set in the step 1 .
Notes: � A frequency between 87.5 MHz and 88.4 MHz can be selected. � Lower the volume of the monitor and adjust the sound level with the sound control of the radio. � When tuning in the FM frequency, the autoseek function may not always stop on the correct frequency. In these cases, tune in the frequency manually. � Changes in temperature could cause the frequency to drift. In such cases, you may hear a slightly distorted audio. Retune the frequency to eliminate the distortion. � The effective distance of the FM transmitter is about 1.5m (5 feet). Make sure the transmitter's antenna is within 1.5m of the FM receiver's antenna for best performance.
