PANASONIC TX51P250H
Instrukcja Obsługi

8. Use the Position Buttons to adjust each point so that the Green Crosshatch Pattern is aligned with the vertical and horizontal lines of the Convergence Adjustment Sheet. 9. Push the "MULTI PIP" and with from "G-EASY DATA" to "G-EASY CURSOR". 10. Repeat step 7~9 to adjust the 9 adjustment points.

11. Select the "G-POINT CURSOR" mode by pushing "TV/AV" button on the remote control. 12. Use the Position Buttons to move the cursor to the point where you wish to change the data (adjustment lines). Then use the "MULTI PIP" to change from "G-LINE CURSOR" to "G-LINE DATA". 13. Use the Position Buttons to adjust each point so that the Green Crosshatch Pattern is aligned with the vertical and horizontal lines of the Convergence Adjustment Sheet. 14. Push the "MULTI PIP" and switch from "G-POINT DATA" to "GPOINT CURSOR". 15. Repeat step 12-14 to adjust all of adjustment points.
54