ONKYO TXNR901
Instrukcja Obsługi

Advanced Setup�Continued
� b. PCM fs = 96k With this setting you can specify the listening mode to be used when a PCM 96 kHz digital audio signal is played (DVD, etc). Only listening modes that can be used with the PCM 96 kHz signal format can be selected. � The Last Valid option means that the listening mode selected last will be used. � c. Dolby D With this setting you can specify the listening mode to be used when a Dolby Digital format digital audio signal is played (DVD, digital cable/satellite, etc). Only listening modes that can be used with Dolby Digital can be selected. � The Last Valid option means that the listening mode selected last will be used. � d. DTS With this setting you can specify the listening mode to be used when a DTS format digital audio signal is played (DVD, LD, CD, etc). Only listening modes that can be used with DTS can be selected. � The Last Valid option means that the listening mode selected last will be used. � e. D.F. 2ch With this setting you can specify the listening mode to be used when a 2-channel (2/0) digital audio signal (PCM, Dolby Digital, DTS) is played (DVD, digital cable/satellite, etc). Only listening modes that can be used with 2-channel digital audio can be selected. � The Last Valid option means that the listening mode selected last will be used. � f. D.F. Mono With this setting you can specify the listening mode to be used when a mono digital audio signal is played (DVD, etc). Only listening modes that can be used with mono PCM, Dolby Digital, or DTS can be selected. � The Last Valid option means that the listening mode selected last will be used. Notes: � The b, c, d, e, and f settings are available only when an digital audio input is assigned to the selected input source. � You can select other listening modes during playback (see page 59), however, the listening mode assigned here will be resumed after the TX-NR901 has been set to Standby. Note: � This procedure can also be performed by using the TX-NR901�s [SETUP] button, [ ]/[ ]/[ ]/[ ] buttons, and [ENTER] button.

Audio Adjust Functions
This section explains the audio and listening mode settings you can use to tailor the sound as you like.

1

Press the scroll wheel, and then press the [SETUP] button. The main menu appears onscreen.

2
ENTER

Use the Up/Down [ ]/[ ] buttons to select �3. Audio Adjust,� and then press the [ENTER] button. The Audio Adjust menu appears.

ENTER

3
ENTER

Use the Up/Down [

]/[

] but-

tons to select the menu items, and then press the [ENTER] button. The Tone Control menu is shown here.
Advanced Menu

ENTER

3.Audio Adjust 3-1.Tone Control a.Bass b.Treble : : 0 0

Quit:|SETUP|

4
ENTER

Use the Up/Down [ ]/[ ] buttons to select the settings, and use the Left/Right [ ]/[ ] buttons to set them. The settings are explained below.

5

Press the [SETUP] button. The setup menu closes.

68