ONKYO TX-SR605
Instrukcja Obsługi

Advanced Setup�Continued
Volume Setup/OSD Setup
This section explains the items on the Miscellaneous menu.

4

Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right [ ]/ [ ] buttons to set them.
Maximum Volume

Volume Setup

1

Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen.

With this preference, you can prevent the volume being set too high by specifying a maximum volume level. The range is from 50 to 99. To specify no maximum volume, select Off.
Power On Volume

2

Use the Up and Down [ ]/[ ] buttons to select �6. Miscellaneous,� and then press [ENTER]. The Miscellaneous menu appears.
6. Miscellaneous 1. Volume Setup 2. OSD Setup

With this preference, you can specify the volume setting to be used each time the AV receiver/AV amplifier is turned on. The range is MIN, 1-99, MAX. To use the same volume level that was used when the AV receiver/AV amplifier was turned off, select Last. The �Power On Volume� cannot be set higher than the �Maximum Volume� setting.
Headphone Level

3

Use the Up and Down [ ]/[ ] buttons to select �1. Volume Setup,� and then press [ENTER]. The Volume Setup menu appears.
6�1. Volume Setup Maximum Volume Power On Volume Headphone Level Off Last 0dB

With this preference, you can specify the headphone volume relative to the main volume. This is useful if there�s a volume difference between your speakers and your headphones. The headphones level can be set from �12 dB to +12 dB.

5

When you�ve finished, press the [SETUP] button. The setup menu closes.

Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

81