EVOLUTION UC-33
Podręcznik Użytkownika

Evolution UC-33 Advanced User Guide

Evolution UC-33 Advanced User Guide

About The Evolution Librarian Software
The Evolution Librarian Software is a Windows PC librarian program developed for Evolution products. The program not only works with the MK-425C/449C/461C keyboards but is also compatible with the Evolution UC-33e USB controller. That means you can use one librarian package for both your keyboard and your controller, if you own a UC-33e And even better, you can swap patches between Evolution products that are supported by the Librarian so you never have to create the same patch twice. The librarian itself, allows you to send and receive the 10 patches to and from the MK-425C/449C/461C, load and save memory banks, view how individual patches have been programmed and drag and drop patches in order to create new combinations in the 10 memory locations.

Assigning A Note To A Button
1.

Press SELECT and press the �0� button. The display will show that you have selected controller 34. Press ASSIGN and enter '147' this is the MIDI CC number that corresponds to Note on/off mode, as shown in Appendix B. Press DATA MSB twice and enter a value of '100'. This means when you press the button, a Note on message will be sent out with a velocity of 100. Press DATA LSB twice, and enter a value of '000'. This means when you release the button, a Note off message will be sent out. Press the PROGRAM button twice and enter '064'. This will mean you are sending out MIDI note 64 or E4, each time you press the button. The MIDI note numbers are given in Appendix D.

2.

3.

4.

Installing The Evolution Librarian Software
1. 2. 3. Insert the Evolution Installer CD-ROM in to your CD-ROM drive. Click on �Librarian Installer� Follow the on-screen instructions to complete the installation process

5.

Once the installation has been completed, launch the program. The following is a screenshot of what you should be seeing on your monitor.

This button mode has many uses. You can use this mode to trigger samples, control lighting equipment, play keyboard notes and much more. Note: When you press the button in note mode, the LCD display will briefly show the note velocity.

About SysEx Messages & Device ID
When transmitting SysEx messages, the individual control channel number does not define a transmit channel, but a device ID. This is made clear since when you press the CHANNEL button, the CC symbol will not be shown and there is no �c� in the 3 digit display. Device ID�s range between 00 � 127. In most cases, you should set the device ID as 127. 127 means the SysEx message will be received by all devices. Please note that the device ID for a Sys Ex message assigned to a controller can not be changed using the Device ID buttons. These buttons are used for varying the global device ID of the UC33.

2 1

20

13