JVC UX-A10DVD
Instrukcja Obsługi

English

Adjusting the Audio Input Level
If the sound from the component connected to this unit is too loud or is not loud enough when changing from another source to �AUX� or �AUX-DIGITAL� (without changing the volume level), you can change the audio input level through the AUX jacks or the OPTICAL DIGITAL IN terminal.

7 Adjusting the audio input level through the OPTICAL DIGITAL IN terminal

1 Press FM/AM/AUX (or AUX on the main unit)
repeatedly so that �AUX-DIGITAL� appears in the main display. On the remote control: � Each time you press the button, the source changes as follows:

7 Adjusting the audio input level through the AUX jacks

1 Press FM/AM/AUX (or AUX on the main unit)
repeatedly so that �AUX� appears in the main display. On the remote control: � Each time you press the button, the source changes as follows:

FM AM AUX-DIGITAL AUX

On the main unit: � Each time you press the button, the source alternates between �AUX� and �AUX-DIGITAL.�

2 Press and hold SET on the remote control for more
than 2 seconds.

FM AUX-DIGITAL
On the main unit:

AM AUX

� Each time you press the button, the source alternates between �AUX� and �AUX-DIGITAL.�

3 Press Cursor 5/� to adjust the audio input level.
You can adjust the audio input level through the OPTICAL DIGITAL IN terminal within the range from ��12 dB� to �12 dB� by 2 dB step. (�0 dB� is the initial setting.) � To increase the audio input level, press Cursor 5. � To decrease the audio input level, press Cursor �.
If you change the audio input level through the OPTICAL DIGITAL IN terminal The recording level through the OPTICAL DIGITAL IN terminal also changes according to the change of the audio input level.

2 Press and hold SET on the remote control for more
than 2 seconds. � Each time you press and hold the button, the audio input level alternates between �LEVEL 1� and �LEVEL 2.� LEVEL 1: Select when the sound is too loud (initial setting). LEVEL 2: Select when the sound is not loud enough.

Prohibiting Disc Ejection
If you change the audio input level through the AUX jacks The recording level through the AUX jacks also changes. Selecting �LEVEL 2� rather than �LEVEL 1� makes the sound recorded louder.

You can prohibit disc and MD ejection from the unit and can lock discs�Disc Lock. On the main unit ONLY: To prohibit disc ejection, press and hold 7, then press REV. MODE when the unit is in standby mode. �LOCKED� appears in the main display for a while, and the loaded disc and MD are locked.

If you try to eject the locked discs �LOCKED� appears to inform you that the Disc Lock is in use. To cancel the prohibition and unlock the discs, repeat the above procedure. �UNLOCKED� appears in the main display for a while, and the loaded disc and MD are unlocked.

23