Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 42 (kliknij aby zobaczyć)
Using Sleep Timer
With Sleep Timer, you can fall asleep to your favorite music. � You can set Sleep Timer while the unit is turned on.
To sleep with the Sleep Timer and wake up with the Daily Timer
The unit turns off when the shut-off time comes (set by the Sleep Timer), and turns on when the timer-on time comes (set by the Daily Timer.)
How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.
1 2 3
1 Press SLEEP repeatedly until the time length you
want appears on the display. The timer ( ) indicator starts flashing and �SLEEP 10� appears on the display.
Set the Daily Timer as explained on pages 35 and 36. Start playing back any source you want to listen to before sleep. Set the Sleep Timer.
Timer Priority
Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps. Here are the priorities for each timer.
� Each time you press the button, the time length changes as follows:
� A timer with the later timer-on time has priority. If Recording Timer is set to come on while Daily Timer is operating, Daily Timer is canceled.
6:00 6:30 7:00 7:30
10
Canceled
20
30 120
60 90
Recording Timer Daily Timer Canceled
2 Press SET or wait for about 5 seconds.
The display dims. �SLEEP� appears on the display.
To check the remaining time until the shut-off time, press SLEEP once. The remaining time until the shut-off time appears for about 5 seconds. To change the shut-off time, press SLEEP repeatedly until the time length you want appears. To cancel the setting, press SLEEP repeatedly until �SLEEP� disappears from the display.
If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will not shut off the power even if the shut-off time comes.
18:00 18:30 19:00 19:30
Recording Timer Sleep Timer Canceled
Sleep Timer will be canceled in the following: � When you turn off the unit. � When you operate other timer settings. � When you adjust the clock.
If �CLOCK ADJUST� appears on the display You need to set the built-in clock (see page 34.)
