Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
UX-A7DVD
2.1.12 Removiing the power amplifier board (See Fig.28, 29) � Prior to performing the following procedure, remove the metal cover, the DVD mechanism assembly, the front panel assembly, the rear cover/ rear panel, the main board and the base chassis. (1) Disconnect the wire from connector CN111 on the power amplifier board. (2) Remove the band attaching the wire to the power amplifier board. (3) Release the wires from the clamp. (4) Move the power amplifier board upward to release the two joints g and remove to the right.
