Listening to the Radio
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing. You can change the AM tuner intervals while the System is on stand by. If the received FM station is hard to listen
FM MODE/ MP3
Remote ONLY
MONO STEREO
MONO:
1
2 sec.
STEREO:
Reception will improve though stereo effect is lost. MONO indicator lights up. Normally select this. Stereo effect will be resumed.
On the main unit
To preset the stations
Remote ONLY
� Current interval setting appears on the display.
You can preset 30 FM and 15 AM stations.
2 Select the interval spacing while current setting
appears on the display.
9
REC
1 Tune in to a station you want to preset. 2 Activate the preset number entry mode.
SET
REC
10
REC
� Finish the following process while the indication on the display is flashing.
3 Select a preset number for the station you store.
1 4 2 5 8 10 3 6 9
To select the band (FM or AM)
7
FM
AM
10
Examples: To select preset number 5, press 5. To select preset number 15, press +10, then 5. To select preset number 30, press +10, +10, then 10.
To tune in to a station
While FM or AM is selected... Remote control: 1 sec.
DOWN
4
Main unit: 1 sec.
UP
� You can also use the PRESET UP/PRESET DOWN buttons. Store the station.
SET
REC
Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing. � When you repeatedly press the button, the frequency changes step by step. To stop searching manually, press either button.