JVC UX-GD7UG
Instrukcja Obsługi

Advanced Tape Operations (see pages 31 and 32)
Recording on a Tape: � The recording level is automatically set correctly. Thus, you can adjust the sound you are actually listening to without affecting the recording level. � There is leader tape which cannot be recorded onto at the start and end of cassette tapes. Thus, when recording CDs or radio broadcasts, wind the leader tape first to ensure that the recording will be made without any music part lost. � If you start recording with no cassette or a protected tape has been inserted, �NO REC� appears on the display. � When using Reverse mode for recording, start recording in the forward (3) direction first; otherwise, recording will stop when only one side (reverse) of the tape is recorded. � You can also change Reverse mode setting ( and ) after starting recording. � You cannot open or close the disc tray while recording. Synchronized Disc Recording: � When the tape reaches its end in the forward direction (3) during recording with Reverse mode set to , the last tune will be re-recorded at the beginning of the reverse side.

Setup Menu Operations (see pages 35 to 38)
LANGUAGE Setup Menu: � When the language you have selected for �MENU LANGUAGE,� �AUDIO LANGUAGE,� or �SUBTITLE� is not recorded on a disc, the original language is used as the initial language. PICTURE Setup Menu�MONITOR TYPE: � Even if �4:3 PS� is selected, the screen size may become 4:3 letter box with some DVD Video discs. This depends on how the discs are recorded. � When you select �16:9� for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. AUDIO Setup Menu�DOWN MIX: � This setting is not effective when DTS multi-channel software is played back. OTHERS Setup Menu�ON SCREEN GUIDE: � Setup Menus and on-screen bar will be displayed (and recorded) even though this function is set to �OFF.� Subtitles and the information for zooming in always appear on the display regardless of this setting.

Timer Operations (see pages 33 and 34)
� When you unplug the AC power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again. � If you set the Sleep Timer after Daily Timer starts playing the selected source, Daily Timer is canceled. � If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when timer is activated. � You cannot use the SLEEP timer while activating the Recording timer.

42