Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
4
Select the timer (Daily Timer or Recording Timer) with the source to play.
On the remote control: Press UP or DOWN to select the timer, then press CLOCK/TIMER. On the unit: Press ¢ or 4 to select the timer, then press TIMER/SNOOZE. � Each time you press UP (¢) or DOWN (4), the timer mode and the source change as follows:
REC
UP
6 7
Adjust the clock if you need.
� See �Setting the Clock� on page 10.
DOWN
Press STANDBY/ON (or on the unit) to turn off the unit (standby) if you have set the timer with the unit turned on.
STANDBY/ON
CLOCK / TIMER
� When the timer turns on the unit, the (timer) indicator starts flashing. (If the Recording Timer is selected in step 4, the REC indicator also starts flashing.)
TIMER/SNOOZE
TUNER TAPE
TUNER CD
To deactivate the timer temporarily, press and hold CLOCK/TIMER (or TIMER/SNOOZE on the unit) until the (timer) indicator on the display goes off.
CLOCK / TIMER
TIMER/SNOOZE
TUNER : tunes in to the last station you were listening to. (Daily Timer) REC TUNER : records the last station you were listening to. (Recording Timer) � Put a recordable cassette into the deck. CD : plays a disc. (Daily Timer) � Load a disc. TAPE : plays a tape. (Daily Timer) � Make sure that the tape is in the cassette deck. � Make sure that the tape direction is correct. The unit enters the volume level setting mode.
To activate or change the timer (with the previous setting), follow steps 1 to 7 on pages 20 and 21. � If you want to change the timer setting after the Daily Timer be used, first deactivate the timer.
5
Select the volume level.
On the remote control: Press UP or DOWN to set the volume level, then press CLOCK/TIMER. On the unit: Press ¢ or 4 to set the volume level, then press TIMER/SNOOZE. � You can select the volume level (�VOLUME � �� and �VOLUME 0� to �VOLUME 40�). If you select �VOLUME � �,� the volume is set to the previous level when the unit was turned off. � To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level �VOLUME 0.� The unit enters the clock setting mode.
� If the unit is turned on when the timer on-time comes Timer does not work. � When you unplug the power cord or if a power failure occurs The timer will be canceled. You need to set the clock first, then the timer again.
