Recording
IMPORTANT:
� It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. � The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. � If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit. � You can only use type I tape for recording.
� DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged. � DO NOT use type II and type IV tapes since the unit is not compatible with such tapes. � The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.
Recording from the Radio
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
� See also page 16.
2 Close the cassette holder gently. 3 Press TUNER/BAND to select either
�FM� or �AM.�
� When recording from discs, see �Recording Discs�Disc Synchronized Recording� on page 18.
BAND TUNER
4 Tune in to the station you
want to record.
5 Press � (recording).
� and # lock down, and the recording starts.
At the start and end of cassette tapes There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music.
You cannot press � in the following cases: � If no cassette is inserted. � If a protected tape is inserted.
To protect your recordings
Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape.
To stop recording for a moment, press * (pause). To resume recording, press * again. To stop recording, press &/).
To remove the cassette, press &/) while recording is stopped.
Adhesive tape
To record an AM (MW) station�Beat Cut
On the remote control ONLY:
While recording an AM (MW) broadcast, beats BEAT CUT may be heard (which are never heard when listening to the broadcast without recording it). If this occurs, press BEAT CUT repeatedly, while recording, until the beats are reduced. � Each time you press the button, the display changes alternates �BEAT 01� and �BEAT 02.�
