JVC UXP7
Instrukcja Serwisowa

UX-P7

Removing the tuner board (See Fig.4 and 5)
Prior to performing the following procedure, remove the metal cover. 1. Disconnect the card wire from connector CN1 on the tuner board. 2. Remove the screw D on the right side of the body. 3. Remove the two screws E on the rear panel.

D

CN1 board

Fig.4

Removing the CD mechanism assembly (See Fig.6 to 8)
Prior to performing the following procedure, remove the metal cover and the rear cover. 1. Disconnect the card wires from connector CN903, CN904 and the wire from CN905 on the main board on the upper side of the body. 2. Remove the screw D attaching the tuner board and the CD mechanism on the right side of the body. 3. Remove the two screws F attaching the rear panel and the CD mechanism on the back of the body. 4. Move the rear part of the CD mechanism assembly upwards to disengage the two joints a and release from the rear panel. Pull the front panel toward the front and move the rear part of the CD mechanism assembly upwards. Then pull out the CD mechanism assembly from the front panel backward. REFERENCE: To remove the CD mechanism assembly efficiently, disconnect the card wire connecting the tuner board with the main board in advance.

E

Rear cover Rear panel

Fig.5
Rear panel Main board CN905 Tuner board

CN904 Card wires CN903

Front panel assembly

CD mechanism assembly

Fig.6
CD mechanism assembly

D

Tuner board

Fig.7

1-8