JVC UX-T300R
Instrukcja Obsługi

s Press the TIMER/SNOOZE 5.
button.
The volume level blinks on the display.

Setting the SLEEP Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting this timer, you can fall asleep to music and know that your Unit will turn off by itself rather than play all night. You can only set the Sleep Timer when the Unit is on and a source is playing.

s Turn the MULTI JOG dial to the right or left 6.
to select the volume level (0 to 50).

s

s Press the TIMER/SNOOZE button. 7.
The timer setting is completed and the display returns to the display before you set the timer.

To set the SLEEP Timer, follow this procedure:

s With the System on and a source playing, 1.
press the SLEEP button on the Remote Control.
The �SLEEP� indicator lights up.

s Before turning off the Unit, prepare the 8.
music source selected in step 4.
TUNER: Tune to the desired station. TUNER REC: Tune to the desired station and insert a cassette tape for recording the station. CD: Insert a CD. TAPE: Insert a prerecorded cassette tape. � In the source �TUNER�, �CD�, or �TAPE�, the timer acts as a Daily timer, and having been set will be activated at the same time every day until the setting is turned off. In the source �TUNER REC�, the timer acts as a Once timer. Having been performed, the details of the setting remain stored but the Timer status is set to off. To re-activate the Once timer, press the TIMER/SNOOZE button for more than two seconds. Press the TIMER/SNOOZE button until the display returns to the original display before setting the time.

s Set the length of time you want the source 2.
to play before shutting off.
� Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence:

= 30 = 60 = 90 = 120 = Cancelled = (back to the be-

ginning) After setting the number of minutes for the Sleep Timer, the display will stop blinking after 5 seconds and return to the display as before setting the Sleep Timer. The Unit is now set to turn off after the number of minutes you set.

To Confirm the Sleep Time
When the SLEEP button is pressed, the remaining sleep time is displayed. If it is pressed again, a new sleep time can be set.

s Press the 9.

button to turn off the Unit.

To cancel the timer, press the TIMER/SNOOZE button for more than two seconds until the Timer indicator goes out on the display. To re-activate the cancelled timer, press the TIMER/ SNOOZE button for more than two seconds until the Timer indicator lights up on the display. Press the TIMER/SNOOZE button until the display returns to the original display before setting the time. To confirm the timer settings, cancel the timer once and then activate the timer again by pressing the TIMER/SNOOZE button for more than two seconds. Press the TIMER/SNOOZE button repeatedly, and you can see the current timer settings (ON time, OFF time, source, and volume). To change the timer setting, repeat the setting procedure from the beginning. � When the timer turns on, it is possible to fade in the sound from volume level 0 (zero) to the preset volume. � When the volume setting is set to �VOLUME-� (volume level is not specified), the timer playback volume is set to the level used before setting the timer. CAUTION: If the Unit is unplugged, or a power failure occurs, the clock and timer setting will be lost after about 24 hours. You will need to reset the clock first, then the timer.

To Cancel the SLEEP Timer Setting
Press the SLEEP button until the �SLEEP� indicator goes off on the display. Turning off the Unit also cancels the SLEEP Timer.

5-Minute Snoozing ���������
When the timer turns on the music source you can, if you wish, activate the 5-minute snoozing function to temporarily stop playback:

Press the TIMER/SNOOZE button on the Unit.
The power is turned off for five minutes for snoozing.

17

English