Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 32 (kliknij aby zobaczyć)
Disassembly
V3i
Removing and Replacing the Flip Assembly Cover
1. 2. 3. Remove the battery cover, battery, SIM, antenna, rear housing, and transceiver board assembly as described in the procedures. Remove the 4 flip assembly screw caps. Use the T-5 driver to remove the 4 T5 screws from the flip assembly (see Figure 11). Retain the screws for re-assembly.
Flip screws
Flip screws
051128o
Figure 11. Removing the Flip Assembly Screws 4. Before removing the flip cover, note the locations of the smart buttons on the sides of the flip assembly.