NIKON VAA59214
Instrukcja Serwisowa

VAA59004-R.3687.A
Making of the lens barrel drive tool � Perform disassembly to D5 in the repair manual. � Remove the monitor holder and �x the monitor as shown in Fig. 1.

To prevent the LCD monitor from contacting with the main PCB, process the cardboard and adhere it with the insulation tape.

Fig.1

� Charging starts when the power is ON. So, be sure to cover the solders of the SB wires and the condenser terminal with the insulation tape.

�Set the FPC of the lens unit, which is to be inspected, to the connector.

� Check the lens barrel operation by the W-T button. � Check the barrier operation by turning on/off the power. � Set the zoom position to the "T" side and release the shutter, then check the shutter operation.

- A5 ï½¥ L3 -