AEG VAMPYR CE 684
Instrukcja Obsługi

Making the Vacuum Cleaner Ready for Use

Using the Nozzles

The accessories can be connected by pressing together and turning, and separated by pulling and turning:

The nozzles are connected to the suction tube by pressing and turning, and removed by pulling and turning.

Connect the Suction Hose Plug the suction hose connector into the suction inlet. The connector clips into place and is free to rotate. Press the release button and pull out the connector in order to remove the suction hose. Connect Together the Suction Hose and Suction Tube. Firmly connect the suction tube handle to the suction tube.

Crevice Nozzle For vacuuming crevices, gaps and corners.

Using the VARIO 500 Floor Nozzle For daily care of carpets and hard floors. The floor nozzle is manually adjustable. Extended brushes for smooth floors, retracted brushes for carpets. See additional accessories for special floor nozzles. Upholstery Nozzle For vacuum cleaning all upholstered furniture, mattresses, etc. The thread lifting strips on the nozzle even pick up thread and lint.

Connect the Suction Tubes Together (depending on model) Connect the two tubes together.

Mains Connection/Cable Rewind The mains cable is stored in the cable compartment. Pull out the cable and plug into a mains socket. Unplug from the mains socket. Press the foot button, the cable is automatically rewound after vacuuming.

Adjust the Telescopic Tube (depending on model) Push down the button on the tube and adjust the tube to the desired working position.

Crevice and Upholstery Nozzle Stored in the Appliance To meet individual cleaning requirements two accessories are included with the appliance, these are stored in an integrated accessories compartment. Open the lid of the accessories compartment upwards at the recessed handle. The nozzles can be fitted to both the suction tube and the suction hose handle as required.

12

13