Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
VC-A51SRU
FRONT PANEL PARTS
F
500
500-9
500-3
E
500-8
500-10 500-2 500-7 500-6
D
500-1
C
500-5
B
500-4
A
1
2
3
4
5
6
PRECAUTION ON FRONT PANEL SET-UP
Cassette cover Front panel Cassette housing Cassette cover open lever Cassette cover open lever About 45° Cassette cover 1 Cassette cover open lever 5 2 3 4
Before attaching the front panel in position, make sure that the cassette cover open lever is in its right place (lower-most). If it is out of position, push it down with a finger.
Keep the cassette over about 45° open and make sure that the cassette cover open lever is between the front panel and the cassette cover. Now fix the front panel in place.
Do not mount the front panel with the cassette cover tilted too open. Otherwise the cassette cover might wrongly run on the cassette housing.
Removing the cassette compartment cover. 1 Open the cassette compartment cover fully. 2 Remove the center positioner. 3 Slide the cover to the right. 4 Slightly bend the cover. 5 Draw out the left-side rod.