HOW TO SET A DELAYED RECORDING
7. Enter the start time using the [
/ ] or the
1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7D0 3 2 1 : 0 5 -:---/-- --:--:---/-- --:--:-SP SP ---
minutes (when entering less than 10 hours or minutes add a '0' before the number), for example for 21:05 start, press 2 1 0 5. Then press to move to the next setting.
NUMBER BUTTONS, hours first then
8. Enter the stop time, for example for 22:30 stop,
press 2 2 3 0.
9. If your VCR has long play facility and you wish to
change the use the [ / ] to highlight SP. Press [ / ] to select standard play (SP) or long play (LP) as required.
1/2 DA T E 21 / 06 P R S T AR T S T OP 02 12 : 00 13 : 00 21 : 05 -:--:-23 : 00 -:--:-SP LP --9 / 0 7D0 3 --/-- ---/-- --
RECORDING SPEED,
10. Press SET to confirm.
� The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure. settings, press MENU to remove the menu from the TV screen.
11. When you have completed entering timer
12. Ensure that the tape on which you wish to
record is inserted into the VCR, then press TIMER ON/OFF once to place the VCR in TIMER STANDBY mode. will be shown on the display.
NOTES:
� � � If flashes a video tape has not been inserted into the VCR. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. During recording, press STOP ( ) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STANDBY.
If problems persist contact the SHARP Helpline on tel: 0990-274277
17
