SHARP VLME100S
Instrukcja Serwisowa

VL-ME100S/H/E

3. DISASSEMBLY OF THE SET
Note: Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed. 1. 2.
Note: After the cabinet B is inserted between the zoom unit and the ANG, it is secured with screw. If the cabinet B is secured with screw with it inserted between the cabinet A and the zoom unit, the zoom does not operate.
Screw Cabinet A Zoom unit Cabinet B

LCD monitor lock release button

(e) (f) (b) Terminal side cabinet
ANG

A

(o) Cabinet A (b) LCD monitor release button Shoe cover (b) Shoe metal cover

� Remove the screw ((o)XiPSF17P05000)(1 pc.) fixing the cabinet A. � Remove the screw ((b)XiPSF17P03000)(1 pc.) to remove the � Press the LCD monitor lock release button and open the LCD shoe metal cover. by 90�. � Remove the screws ((f)XiPSN17P04000)(1 pc.), ((e) � While pulling up the LCD monitor release button, slide the LCD XiPSN17P03000)(2 pcs.) and ((b) XiPSF17P03000)(1 pc.) in the horizontal direction and lift it to remove it. (Shift the LCD fixing the terminal side cabinet. in the direction indicated by the arrow A.) � Remove the screw ((b)XiPSF17P03000)(1 pc.) fixing the shoe cover.

3.
Viewfinder

(b)

(e) (b) (d) (f)

Battery cover Cabinet B

(f)

� Remove the screws ((e)XiPSN17P03000)(3 pcs.), ((f)XiPSN17P04000)(3 pcs.) and ((d)XiPSN17P02000)(1 pc.) fixing the cabinet B. � Remove the screws ((b) XiPSF17P03000)(6 pcs.) fixing the battery cover to remove the cabinet B, and then remove the battery cover. (Since the main PWB 1, the battery cover FPC, the viewfinder FPC, and the cabinet B FPC are connected, remove the FPC connector.) � Remove the viewfinder from the battery cover. (They are engaged by claws.) � Remove the shoe cover. (They are engaged by claws.) (Since the main PWB 1 and the hot shoe FPC are connected, remove the FPC connector.)

4