Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
VL-WD250S/H/E VL-WD450S/H/E 6. 9.
(c) (c)
(a)
1) Remove the screw ((a)LX-BZ0221TAFC)(1 pc.) to remove the cassette lid.
10.
(d)
1) Disconnect the B TO B connector of the DV main FPC, disconnect the front and rear FPC connectors, and remove the screws ((c)XiPSF17P04000)(2 pcs.) to remove the main PWB.
7.
(b) (b)
(d) (c)
(b)
(b)
1) Remove the screws ((b)LX-HZ0063TAFF)(2 pcs.) to remove the speaker cover. 2) Disconnect the connector of the speaker to remove the speaker. 3) Remove the screws ((d)XiPSN17P04000)(2 pcs.) and the screw ((c)XiPSF17P04000)(1 pc.), and remove the DV terminal PWB together with the stay front ass'y.
11.
(l)
(l)
1) Remove the screws ((b)LX-HZ0063TAFF)(5 pcs.), and remove the mechanism together with the mechanism PWB fitting angle.
8.
(b)
1) Remove the screws ((l)LX-HZ0017TAFF)(2 pcs.) to remove the LCD ass'y.
12.
(`)
(d) (c)
(d) (c)
(`)
(d)
1) Remove the screws ((b)LX-HZ0063TAFF)(3 pcs.) to remove the zoom switch unit and AV terminal.
1) The shaft (` section) of the LCD tilt unit is rotated in the arrow direction 90°. 2) Turn the LCD tilt unit so as to verticalize it to the LCD cabinet. 3) Remove the fixing screws ((c)XiPSF17P04000)(2 pcs.) and ((d)XiPSN17P04000)(3 pcs.).
