PHILIPS VR175/05
Instrukcja Obsługi

Connecting cables with a SCART socket

Connecting cables without a SCART socket

1 Remove the aerial cable plug from your TV set and insert

1 Remove the aerial cable plug from your TV set and insert

it into the

2

socket at the back of the video recorder.
3

it into the

2

socket at the back of the video recorder.
3

2 Plug one end of the aerial cable provided into the

2 Plug one end of the aerial cable provided into the

socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the plug of a scart cable into the scart socket

socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the female plug of the mains cable into the mains

at the back of your video recorder. Connect the other plug to the TV set.

EXT.1

socket

4

at the back of the video recorder.

4 Plug the other end of the mains cable into the wall

socket.
5 Switch on your TV set and select the programme number

that you have earmarked for video playback. (see operating manual for your TV set).
4 Insert the female plug of the mains cable into the mains

socket

4

at the back of the video recorder.

6 Ensure that no cassette has been inserted. With the video

5 Plug the other end of the mains cable into the wall

socket.

recorder switched off, hold the SYSTEM button for a few seconds until a modulator frequency e.g.: �M583� (UHF-channel 35) appears in the display. The video recorder transmits a test picture.
7 Tune in the TV set in the UHF wave band until this picture

appears.

MODULATOR

583

------------------------/+ ON/OFF gCL OK

8 Switch off the video recorder with the

STANDBY m

but-

ton.

3