PHILIPS VR200/05
Instrukcja Obsługi

5.

MANUAL RECORDING
Recording with automatic switch-off (OTR one-touch-recording)
a Put a cassette in the machine. b Use the P q or P r button to select the programme

Use �Manual Recording� to make a spontaneous recording (for example, a programme currently being shown). E If you want to start and stop a recording manually, read the section: �Recording without automatic switch-off�. E If you want to start a recording manually but have it stopped automatically, read the section: �Recording with automatic switch-off�. E If you want a recording to be controlled automatically by a satellite receiver, read the section entitled �Automatic recording from a satellite receiver�.

number you want to record.
c Press the RECORD/OTR n button on the remote control. d Press the RECORD/OTR n button again and again until the

Recording without automatic switch-off
a Insert a cassette. b Use the P q or P r button to select the programme

display on the video recorder shows the desired end time or length of the recording. D To cancel this information, press the CLEAR (CL), y button.

number you want to record, for example, �P01�. On the display appears:

Protecting your recordings
So that you don�t accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right.

BBC1
D When a TV channel transmits a channel name, it will show on the video recorder display. D Programme numbers �E1� and �E2� are for recording from other sources (through scart sockets EXT.1 AV 1 and EXT.2 AV 2 ).
c To start recording, press the RECORD/OTR n button on the

Auto-assembling
You can use the auto-assembling function to join individual recordings without any major picture disturbance between them.
a While the cassette is playing, search for the correct

remote control or

RECORD n

on the video recorder. On

the display you will see:

0:00
d Stop recording with the STOP h button.

position on the tape.
b Stop the cassette by pressing the STOP h button. �9�

will appear in the display.
c Now start recording as usual by pressing the
RECORD/OTR n

button on the remote control.

13