|
|
|
Kto jest w sklepie?
Sklep przegląda 5721 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
1.
HOW TO CONNECT YOUR VIDEO RECORDER
How to connect your video recorder to the TV set
We recommend the use of a scart cable. This will give you the best picture and sound quality.
Important for the United Kingdom
This machine is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug, please follow these instructions.
a Take off the fuse cover and take out the fuse. b Put in a new fuse which should be a BS1362 3A, A.S.T.A.
or BSI approved type.
c Refit the fuse cover.
If the plug fitted is not suitable for your socket, cut it off and fit another type. If the plug you fit contains a fuse, it should be a 3Amp fuse. If you fit a plug which does not need a fuse, make sure the fuse on your fuse box is not greater than 5 Amps. D Note: Please destroy the plug you have cut off so that it cannot be used in a 13 Amp socket somewhere else. How to connect a plug The wires in the lead from the video recorder are coloured as follows. * Blue - �neutral� (�N�). * Brown - �live� (�L�).
d Connect the blue wire to the terminal in the plug which is
When you install your video recorder for the first time, please read: E If your TV set has a scart socket and you are using a scart cable, please read the section �Connecting with a scart cable�. E The section �Connecting without a scart cable�, if you are not using a scart cable.
Connecting with a scart cable
marked with the letter �N� or coloured black.
e Connect the brown wire to the terminal in the plug which
is marked with the letter �L� or coloured red.
f Do not connect either of the wires to the terminal in the a Switch off the TV set. b
plug which is marked with the letter �E�, the symbol \or coloured green or green and yellow. Before you refit the plug cover, make sure that the grip at the bottom of the plug is clamped over the plastic cover of the lead, not just over the two wires.
Remove the aerial cable plug from your TV set and insert it into the
2
socket at the back of the video recorder.
3
c
Plug one end of the aerial cable provided into the aerial input socket on your TV set.
socket on the video recorder and the other end into the
d Plug one end of the scart cable into the EXT.1 AV 1 scart
socket at the back of the video recorder and the other end into the scart socket on your TV set (see instruction manual TV set).
e Switch on the TV set.
4
|
|
|
> |
|
