Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 25 (kliknij aby zobaczyć)
Recording 25
Read and follow the steps below to record a television program. Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
1 2 3 4 5 6 7 8
1 2 3
Turn on the TV. Insert a tape in the VCR.
Insert a tape with its record tab intact in the VCR.
If the VCR/TV light appears on the display panel, go to step 4. If the VCR/TV light does not appear, press the VCR/TV button once. Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 30.)
POWER
VCR/TV
EJECT
1 4 7
2 5 8 0
3 6 9
CHANNEL
5 7
4 6 8
SPEED
MENU
STATUS/EXIT
TIME SEARCH MEMORY
CLEAR
SLOW
REWIND
/PLAY
F.FWD
Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.
REC/OTR
/STOP
PAUSE/STILL
Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear.
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
Helpful Hints
� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button while a tape without a record
To stop recording, press the STOP/p button.
tab is in the VCR, the VCR will eject
the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. � Other recording options are on pages 26-32. � You can change the tape speed during a recording, but some distortion will appear on the tape. � The VCR will record in a preset volume.
