Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 25 (kliknij aby zobaczyć)
Recording 25
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
1 2 3
Turn on the TV. Insert a tape in the VCR.
2 3 4 5 6 7 8
Insert a tape with its record tab intact in the VCR.
If the VCR Light appears on the display panel, go to step 4. If the VCR Light does not appear, press the VCR/TV button once. Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 30.)
POWER
VCR/TV
EJECT
1 4 7
2 5 8 0
3 6 9
CHANNEL
5 7
4 6 8
SPEED
MENU
STATUS/EXIT
TIME SEARCH MEMORY
CLEAR
SLOW
REWIND
/PLAY
F.FWD
Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.
REC/OTR
/STOP
PAUSE/STILL
Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear.
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
Helpful Hints
� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button while a tape without a record
To stop recording, press the STOP/p button.
tab is in the VCR, the VCR will eject
the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. � Other recording options are on pages 26-32. � You can change the tape speed during a recording, but some distortion will appear on the tape. � The VCR will record in a preset volume.
