PHILIPS VR860/02
Instrukcja Obsługi

i Switch off with the STANDBY m button.

How to check or change a programmed recording (TIMER)
a Switch on the TV set and select the programme number

The programmed recording will only function when the video recorder is switched off with the STANDBY m button. D If any of the TIMER blocks are in use, �k� will light up on the video recorder display. D While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press the
STANDBY m

for the video recorder.
b Press the TIMER k button on the remote control.

The programming mode selected last is marked.
c Select the line �TIMER LIST� with the P = or ;P

button. button and confirm with the
P

D If the video recorder is switched on a few minutes before a programmed recording is supposed to begin, �SWITCH TO STANDBY - TIMER RECORDING� will flash on the TV screen. D If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette. D If you forget to load a cassette, �NO CASSETTE� will appear on the TV screen and �k� will flash on the video recorder display. D If you have put in a cassette which cannot be used for recording, the video recorder will automatically eject it. D If `TIMER FULL´ appears on the TV screen when you press the TIMER k button, you have used up all the available TIMER blocks. If you want to clear or check a programmed recording (TIMER block), press the P button and select the TIMERR block with the ;P or P = button. D Programme numbers �E1� and �E2� are for recordings from other sources (through scart socket EXT.1 AV 1 or EXT.2 AV 2 ).

button.

d Select the programmed recording (TIMER) you want to

check or change with the
e Press the P button.

;P

or

P=

button.

f Select the entry field with the Q or P button. g Change any information with the P = or ;P button or

with the

0-9

buttons.

D Under �END�, use the SELECT button to select the recording speed �SP� or �LP�.
h Confirm with the OK button. i To end, press the TIMER k button. j Make sure that the cassette you have put in can be

recorded on. Switch off with the

STANDBY m

button.

D The programmed recording will only function when the video recorder is switched off with the
STANDBY m

button.

25