42 Index Search
When you make a recording, the VCR automatically places an index code at the beginning of the recording. Essentially, an index code is a type of �bookmark� for your tape. This feature is useful if you have several different programs recorded on a single tape. Fast forward or rewind to the next or previous index code on the tape by following the steps below.
3
Insert a tape.
1
CBL / DBS TV VCR
1 2 3
Press the VCR button.
2
VCR/TV
Make sure the VCR is in VCR position. (The VCR light will appear on the display panel when the VCR is in VCR position.) If the VCR light does not appear, press the VCR/TV button once.
1 4
QUICK PROGRAMMING
POWER
EJECT
+
2 5
+
3 6
START
STOP
DATE
.
-
DBS
DAILY
WEEKLY
7
SPEED
8 0
9
CLEAR
STILL/SLOW
Insert a tape in the VCR.
REW PLAY
4
Press the INDEX ¢ button to fast forward to the next index code on the tape. Or, press the INDEX 4 button to rewind to the previous index code on the tape. Wait for the VCR to fast forward or rewind the tape. When the index code is reached, tape playback will begin automatically. NOTE: You may press an INDEX button repeatedly to skip over multiple recordings. For example, if you want to fast forward past four recordings, press the INDEX ¢ button four times. INDEX 4 will appear in the bottom right corner of the screen. The index codes will count down on the screen as the search progresses. (ON SCREEN MODE can not be set to OFF. Details are on page 25.)
STOP
VOL
MENU
EXIT/STATUS
TIMER
SKIP SEARCH
INDEX
SMARTPICTURE
Helpful Hints
� To stop an Index Search that is in progress, press the STOP 9 button. � The VCR does not place an index code at the point where a recording is paused, then resumed. � INDEX may flash on the screen briefly when you begin a recording.
