PIONEER VSX-33TX
Instrukcja Obsługi

Connecting Your Equipment

Speaker impedance
You can change the speaker impedance for VSX-33TX but we recommend using speakers with an impedance of 8�-16� (the default setting). If you are using 6�- less than 8� impedance speakers, you need to change the impedance setting. Use any speaker rated between 6�-16�.
STANDBY/ON SPEAKERS

First turn the receiver off, then press the power button while holding down the SPEAKERS button. The receiver will re-set to the new impedance setting. You can choose the 8�-16� setting or the 6�-8� setting. (This display indicates a 6�less than 8� impedance setting.)

memo To check which impedance setting to hold down the SPEAKERS button for 2-3 seconds. You'll get a display like these telling you the speaker impedance setting.

(This display indicates an 8�16� impedance setting.)

Placing Your Speakers
Proper speaker placement is essential to realize the best sound from your system. The diagram and tips given here are just a rough guide; be sure to read the instructions that come with your speakers.

Speaker placement
If you have a multiple speaker arrangement the placement of the speakers is extremely important. To achieve the best possible surround sound, install your speakers as shown below. Make sure all speakers are installed securely to prevent accidents and improve sound quality. Be sure to consult your speaker manuals for the best placement of the speakers. Some speakers are designed to be floor-standing but others benefit greatly from speakers stands which raise them off the floor.

Front Left

Center

Front Right

Sub Woofer

Surround Left
memo

Listening Position

Surround Right

� Install the left and right front speakers at equal distances from the TV. � When installing speakers near the TV, we recommend using magnetically shielded speakers to prevent possible interference such as distortion in the color of the TV screen. If you do not have magnetically shielded speakers and notice discoloration of the TV screen, place the speakers farther away from the TV. � Install the center speaker above or below the TV so that the sound of the center channel is localized at the TV screen. CAUTION:
When installing the center speaker on top of the TV, be sure to secure it with tape or some other suitable means. Otherwise, the speaker may fall from the TV due to external shocks such as earthquakes, and it may lead to endangering those nearby or damaging the speaker.

20

� If possible, install the surround speakers slightly above ear level. � It may be difficult to obtain a cohesive surround effect if the surround speakers are installed farther away from the listening position than the front and center speakers.