|
Dla tego produktu nie napisano jeszcze recenzji!
06
Using the tuner
5 6
While the display is blinking, press ENTER. Repeat steps 1 � 5 to memorize up to 30 stations.
Listening to memorized station presets
You can do this from both the remote control and the front panel.
TUNER 1/2
TV CONT
Naming station presets
You can input a name of up to eight characters for each preset station in the receiver�s memory. For example, you could input New Jazz for that station and when you listen to it the name, rather than the frequency, will appear in the display. 1 Press CLASS repeatedly to select the class. Press repeatedly to cycle through the three memory classes, A, B and C. 2 Use the STATION +/� buttons to select an FM or AM preset station. 3 Press TUNER EDIT to select the station name mode (NAME INPUT). 4 Edit the name as necessary and press ENTER. Use the / (cursor up/down) hard keys to change the character and the / (cursor left/right) hard keys to move forward/back a position. The name can be up to eight characters (the possible characters are listed below). ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 !�#$%&�()*+,�./:;<=>?@[ \ ] Any time you want to exit the process, press the TUNER EDIT button. 5 Press ENTER when you�re done.
� �
BAND
STATION TUNING CLASS
+ +
MPX
DISP MODE TUNER EDIT
1 Press CLASS to select the class in which the station is stored. Press repeatedly to cycle through the three memory classes, A, B and C. 2 Use the STATION +/� buttons to select the station memory in which the station is stored. You can also use the number buttons on the remote control to recall the station preset.
6 Repeat steps 2 � 5 to memorize up to 30 preset broadcast station names. Tip � To change a station name, just enter the new name over the top of the old one. To erase a station name, enter a new name of eight spaces. � You can switch between the frequency display and the station name display using the DISP MODE button.
56
En
|
