PIONEER VSX-D512-K/KUCXJI
Instrukcja Serwisowa

1

2

3

4

Display 1
A

2

3

4

5

6

7

8

9

10
1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: B AUTO Lights when AUTO signal select is on SB Depending on the source, this lights when a signal with surround back channel encoding is detected. DIGITAL Lights when a digital audio signal is detected. 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected. DTS Lights when a source with DTS encoded audio signals is detected.

11

12
7 MIDNIGHT Lights during Midnight listening. 8 MONITOR Lights when MONITOR is selected

13

14

9 Speaker indicator Shows the speaker system currently in use. 10 Character display

11 ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 12 LOUDNESS

Lights when LOUDNESS has been selected. 13 TUNER indicators

STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. MONO: Lights when the mono mode is set using the MPX button. TUNED: Lights when a broadcast is being received. 14 Master volume level Shows the overall volume level. ---dB indicates the minimum level, and �0 dB indicates the maximum level.

C

2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 4 2 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Pro Logic II decoding. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 6 DIRECT Lights when source direct playback is in use. This function bypasses all tone, balance, Advanced surround, and Dolby Surround effects.

Depending on your level settings for each channel, the maximum level can range between �10 dB and �0 dB.

D

76
1 2

VSX-D511
3 4