|
|
|
Kto jest w sklepie?
Sklep przegląda 6030 gości i
4 zarejestrowanych klientów |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
VSX-D608
@ SIGNAL SELECT button
Use to select input signals for the digital components. First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR 1 (( Function buttons) to select the component, then press SIGNAL SELECT repeatedly to select one of the following: ANALOG : Selects the analog (R and L) audio signals. DIGITAL : Selects the digital audio signals. This receiver automatically detects and displays the format of the signal being input. AC-3 lights when Dolby Digital signals are input, and DTS lights when DTS signals are input. (AC-3 and DTS decoding is switched automatically.) � SIGNAL SELECT is fixed in the �ANALOG� position for components not assigned to one of the four digital input jacks. � Because the audio from a karaoke microphone and LD recorded with analog audio only is not output from the digital output, set SIGNAL SELECT to �ANALOG�. � This receiver can only play back Dolby Digital and PCM (32kHz, 44kHz, and 48kHz), and DTS digital signal formats. With digital signal formats other than these, set SIGNAL SELECT to �ANALOG�.
# DSP MODE button
Press repeatedly to select a DSP sound mode (HALL 1, HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2). Use these modes to produce surround sound from standard (two channel) stereo sources.
$ MIDNIGHT button
Press to hear effective surround sound at low volume levels. The effect is automatically adjusted according to the volume level.
% DIGITAL NR button
Switches DIGITAL NR on or off. Use to reduce noise in digital audio sources.
^ MASTER VOLUME
After turning on the desired component, rotate to adjust the volume.
& PHONES jack
Connect headphones for private listening (the speakers turn off automatically).
* STATION/FREQUENCY (+/�) button
STATION: Press to select the preset channel. FREQUENCY: Press to select the frequency.
( Function buttons
Selects the function. Each press switches the DVD/LD input between DVD/LD and DVD 5.1 channel.
) TAPE 2 MONITOR button
Switches the TAPE 2 monitor on or off.
_ VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the VIDEO INPUT jacks.
58
|
|
|
> |
|
